Product specification - tables

Shape and size of table top

Surface for table tops

Veneer

Walnut

Maple

Beech

Click for edge detail

Click for description

Veneer in A1-quality (high quality). The veneer is made up edge to edge without the use of a glue thread

The suface is lacquered with an acryl-baed UV-laquer while the edges are done with a waterbased laquer. Both laquers are very friendly to the environment and will only have little smell very little by installation.

The edge detail is profiled (45 degrees) and with a 2mm radius on top. - the corners are done with a radius 10mm.

The underside of the worksurface is provided with veneer to obtain maximum strength and countermove to the upper side of the veneer

To obtain the greatest possible durability and wearing qualities we give 4 times filler, prime lacquer, top lacquer and edge lacquer. The hardness of the surface is well within norm.

Laminate

Light grey

Dark grey

Char coal

White

Click for edge detail

Click for description

The table top in laminate is 20mm thick and consists of 2mm laminate, MDF-board og kontra paper on the backside. The surface of the laminate gives a hard and relatively cold surface.

The surface shall not have a treatment as such - of course cleaned, while the edge will be treated with waterbased laquer which is very friendly to the environment and only has a low degree of smell during installation.

The edge detail is profiled (45 degrees) and with a 2mm radius on top. - the corners are done with a radius 10mm.

The underside of the worksurface is provided with veneer to obtain maximum strength and countermove to the upper side of the laminate

To obtain the greatest possible durability and wearing qualities we give 4 times filler, prime lacquer, top lacquer and edge lacquer. The hardness of the surface is well within norm.

The laminate surface is be cleaned with different liquids and is very resistent.

Dark laminat surfaces have a tendensy to show finger prints on the surface.

Linoleum

Char coal

Black

Click for edge detail

Click for description

Linoleum is a living and oily product which should be cleaned with clear water - no chemicals. Agressive chemicals draw the oil out of the linoleum and makes it mat and boring and will easily destroy the living surface. it should be treated with a oily treatment several times every year. We can supply it.

The edge is produced with awaterbased laquer which is very friendly to the environment and only has a low degree of smell during installation.

The edge detail is profiled (45 degrees) and with a 2mm radius on top. - the corners are done with a radius 10mm.

The linoleums table top is 20mm thick and consists of 2mm linoleum, the MDF-board and contra paper on the backsiden. The linoleum surface gives a userfriendly and warm surface.

The underside of the worksurface is provided with contra paper to obtain maximum strength and countermove to the upper side of the linoleum.

Dark linoleum surfaces do not have the tendensy to show finger prints on the surface like traditionel laminates. The surface can have it difficult with coffee rings over time.

Soft-Laminate

Beige

Brown

Cement grey

Stone grey

Black

White

Click for edge detail

Click for description

SOFT laminate is an exclusive surface which is very ideal for table tops for dayly use in offices, etc. It is warm and nice to work at and it is more scratch free, reflection free and resistant than tranditional work surfaces.

The table top in soft laminate is 20mm thick and consists of 2mm soft laminate, the MDF-board and contra paper on the backside.

The surface does not get a treatment in the production - of course cleaned, while the edge will be treated with waterbased laquer which is very friendly to the environment and only has a low degree of smell during installation.

The underside of the worksurface is provided with contra paper to obtain maximum strength and countermove to the upper side of the laminate

The soft laminate surface is be cleaned with different liquids and is very resistent.

The edge detail is profiled (45 degrees) and with a 2mm radius on top. - the corners are done with a radius 10mm.

Dark soft laminat surfaces do not a tendensy to show finger prints on the surface like traditional laminates

Base colour

Foot detail

X foot
standard

Q foot

Wheels 100mm

Click for description

We offer the Orient tables with two different leg details, namely X-leg and Q-leg. The X-leg is ca. 10mm heigher than the Q-leg. The X-leg is 75cm long and the Q-leg 74cm long. Both editions we also have in 50cm lengths.

Both leg details we have in black, silver, white mat chrome and glance chrome.

Both leg details are build up on a strong U-profile which gives the table high stability. In the U-profile is the adjustment function.

It is also possible to put wheels underneath the table - 4 wheels. They have a total height of 10cm which means that the minimum height of the table will 10cm heigher.

Frame system

Frame X

Frame Q

Click for description

We offer two different kinds of frames to the Orient tables. Frame X is the standard frame and frame Q costs extra. Both frame system has their advantages.

Frame X consists of two Z-profiles which are mounted in each end of the frame. They are 690mm long. They have three sets of holes for the frame if ex. the table top is very deep or a heavy CPU-holder is underneath the table top. In this case the Z-profiles can support the hang out.

Frame Q consists of two support arms which can be adjusted forth and back on the frame. In each end a ending plate is attached. The support arms are 630mm long and give a lot of flexibility, ex. if two table tops are connected and need to be supported. The support arms have a small cable tray.

Cable tray Q can be attached directly onto the frame Q.

Cable tray

Cable tray Q

Cable tray NN

Click for description

Finér i høj kvalitet med kvartskåren struktur, hvor finéren er sammensat kant mod kant.

Overfladen er lakeret med akrylbaseret UV-lak, mens kanterne er lakeret med vandig lak. Lakkerne er yderst miljøvenlige og har kun ringe duftgener.

Bordpladernes kanter er profil-faset (45gr) med radius 2 på oversiden - hjørner radius 10mm.

Undersiden af pladen er forsynet med kontrapapir for opnåelse af maksimal styrke og modtræk til overside-finéren, så pladen ikke slår sig.

For opnåelse af størst mulig holdbarhed og slidstyrke giver vi 4 gange spartel, grundlak, toplak og kantlak. Hårdheden af overfladen ligger over angivelse i norm.

Remote control

Remote control
standard

Remote control
programmable

Click for description

You can choose between more control panels for controlling your base. The basic difference is if you are able to programme a certain height, so you sit and stand in the same height every time.

There is a lot of delveopment going on for the moment and it goes in the direction of bluetooth access the controlling your sit / stand base with your mobile or computer. Give us your name and mail for our newsletter so you will be up-to-date with the launching of new products and edtions from us.

The difference between an elder base and a newer base in the Orient range is the colour of the plugs. The bases look visually the same but the new edtion has blue plugs and will furthermore have the newest software.

Vær Please be aware that there are different control panels depending on the range of base. The Orient range has two control panels. The panels will not nescassary fit on another range of bases.